Skip to content

Renewable Energy Integration

Solar AC Ghana integrates solar with the grid, generators and battery storage across Greater Accra and Kumasi — grid-tie, hybrid inverters, net-metering, generator changeover and remote monitoring — engineered to a written specification, with the price given on survey. Same-day service cover.

Solar on its own is only half a system. The value is in how it works with the grid, the generator and a battery — so the ECG bill falls, the critical loads ride through dumsor, and the generator runs only when it truly must. Solar AC Ghana integrates renewable energy across Greater Accra and Kumasi, by EC-certified installers. Call +233 27 000 0866 — book a site survey and we will quote against a written specification.

Why Integration Is Where the Saving Lives

A roof full of panels that switches off in a power cut, or that exports power you could have used, is money left on the table. The real return comes from integration — solar offsetting the daytime bill, a battery holding your essentials through an outage, and the generator demoted to a last resort. That is an engineering job, sized to your loads, not a box on a wall.

What a Renewable Integration Covers

We take the site from “we have power problems” to a coordinated system — solar, grid, battery and generator working together, metered and monitored — sized to your actual loads and documented at every stage.

Systems We Integrate

Grid-Tie Solar

Solar feeds your supply alongside ECG, cutting the daytime bill. Best where the grid is reliable and the goal is to lower the running cost — with net-metering where it applies to your site.

Hybrid Solar & Battery

A hybrid inverter prioritises solar, charges a battery, and holds your critical loads through dumsor — the architecture for sites that cannot afford to go dark when the grid drops.

Generator Changeover & Coordination

We integrate the generator so it hands over automatically — running only when solar and battery cannot carry the load, then stepping back out. Sharply lower fuel and run hours, seamless to the building.

Metering & Remote Monitoring

Net-metering where it applies, plus remote monitoring so you and we can see generation, consumption and battery state — and catch a fault before it becomes an outage.

Integration Architectures at a Glance

GoalArchitectureWhat it gives you
Cut the daytime ECG billGrid-tie solarLower running cost, optional export
Stay on through dumsorHybrid solar + batteryCritical loads ride the outage
Slash generator fuelSolar + battery + changeoverGenerator only as last resort
See and control itNet-metering + remote monitoringLive generation, consumption, faults

How We Deliver an Integration

  1. Survey the site & the loads — architecture set by the survey, price confirmed from it.
  2. Design the integration — grid-tie or hybrid, sized to your loads.
  3. Install & wire the system — arrays to IEC 61215 / 61730, inverters to IEC 62109, under the EC Solar PV licence (Act 832).
  4. Commission, monitor & maintain — remote monitoring, written handover, same-day service cover.

Standards & Compliance

What It Costs

No honest firm quotes a renewable integration before surveying the site — it depends on your loads, whether it is grid-tie or hybrid, the array size, the battery capacity, and the generator and metering work involved. We give you the price from a documented site survey before any work begins, against a written specification — never a blind figure down the phone.

Where We Work — Accra, Ghana

We design and integrate renewable systems across East Legon, Airport City, Cantonments, Ridge, Spintex, Tema, Osu, Labone, Dzorwulu and Achimota — plus Kumasi in the Ashanti Region. Multinationals, institutions and commercial sites: we hold the maintenance relationship and report in writing on every visit.

Areas We Serve

Solar AC Ghana designs and integrates renewable energy systems across Greater Accra — East Legon, Airport City, Cantonments, Ridge, Spintex, Tema, Osu, Labone — plus Kumasi and the wider Ashanti Region.

Frequently Asked Questions

What is the difference between grid-tie and a hybrid system? Grid-tie feeds solar into your supply alongside ECG and cuts the daytime bill, but shuts down in a power cut. A hybrid adds a battery and hybrid inverter, prioritises solar, keeps critical loads running through dumsor, and only calls the generator when the battery is low. We survey your loads and recommend the right architecture.

Can solar work with my existing generator? Yes — we integrate solar, battery and generator so they hand over automatically. Solar and battery run the building first; the generator comes in only when it must, then steps back out. That sharply cuts fuel and run hours, seamlessly to the building.

What is net-metering and can I get paid for export? Net-metering lets a grid-tied system feed surplus solar back to the grid. Ghana operates a net-metering framework, but eligibility depends on your supply and the utility, and the rules are the regulator’s. We tell you honestly what applies at survey and size around your own consumption first.

How much does a renewable integration system cost? Quoted from a documented site survey, never blind — it depends on your loads, grid-tie versus hybrid, the array and battery size, and the generator and metering work. Price against a written specification before any work begins.

Ready to start your project?

Request a custom quote. Same-day response.

Request a Specification